Resources Center
Weißes Papier
Changes Ahead in the Roughness Standards
I have written numerous articles on tooth flank surface roughness measurement. This is such a page-turner of a subject!
Weißes Papier
Materials Matter (DE)
Optical profilometry will become an important tool for predicting gear performance with more research and development of an objective lens to fit into tooth spaces.
Technische Abhandlungen
Report of the Condition of a General Electric Transportation Systems Gearbox
Wind power plant operation and maintenance (O&M) costs remain an appreciable contributor to the overall cost of wind energy, with a capacity-weighted average of $11/megawatt-hour (MWh) for projects installed since 2000 and $9/MWh for projects installed since 2010
Weißes Papier
Rotorcraft Gearbox Regulations: LOL (not what you think)
The European Union’s CS-29 Amendment 7 places more stringent and rigorous testing requirements for certification of Category A type pressurized gearboxes under loss of lubrication conditions compared to the previous regulation.
Weißes Papier
Materials Matter : Roughness Measurement Tips: Calibration, the Razor Blade Test
If a problem is found with a contact stylus profilometer during routine check with a Rubert-Song specimen, do a little troubleshooting before sending it off for calibration and recertification.
Weißes Papier
Roughness Measurement Tips: The Scratch Pad
From the perspective of the shop floor environment, the previous Materials Matter column “Roughness Measurement Tips: 2 V 5” discussed the contact stylus 2-micron radius tip versus a 5-micron radius tip.
Technische Abhandlungen
A Comparison of Surface Roughness Measurement Methods for Gear Tooth Working Surfaces
Surface roughness is a critical parameter for gears operating under a variety of conditions. It directly influences friction and contact temperature, and therefore has an impact on various failure modes such as macropitting, micropitting and scuffing.